LD Type 2 Ton Single Girder Bridge Crane Parameter Table

LD type 2t electric single girder bridge crane (hereinafter referred to as 2t single girder crane) is designed and manufactured according to JB/T1306-94. The 2t electric single girder crane is used together with CD1, MD1 and other forms of electric hoists. It has become a light and small crane with rail operation. The lifting capacity is 2t, and the applicable span is 7.5-22.5m. The working environment temperature is within – 25 -+40 ℃.

LD type 2 ton single girder bridge crane
Structural drawing of 2t single beam crane

Structural drawing of 2t single beam crane
Technical parameters of 2t single beam crane
Crane traveling mechanism Working speed (m/min) 20 ground 30 ground Room
Speed ratio 58.78 39.38 26.36
Motor Type YSE80₂-4 YSE90L-4 7DR100-4
Power 2×0.8 2×1.5 2×1.5
Rotational speed (r/min) 1380
Lifting Mechanism (electric hoist)&electric hoist traveling mechanism Model of electric hoist MD, type model CD, type mode
Lifting speed (m/min) 8/0.8(7/0.7) 8(7)
Lifting height H (m) 6、9、12、18、24、30
Traveling speed (m/min) twenty
Motor Cone squirrel cage model
Working class A3
Electric current 380V 50HZ three-phase
Width of rail 37~70mm
LD Type 2 Ton Single Girder Bridge Crane Parameter Table